- How to connect Cyclus 2 in VirtualTraining Desktop 3.X.X

Cyclus ergometers are connected with computer through the ethernet cable. Besides that Cyclus offers also the possibility of connection through WiFi. Choose what type of connection has your ergometer.

  • Ethernet port
  • WiFi


Informace: You will need a cable specified further for connection. If you have bought a box version of VirtualTraining, required cable is included in the package (except serial cable). Online version package contains only software license. Accessories have to be purchased additionally. All types of cables needed are usually available in shops with electronics.


Ethernet port (RJ45)


You will need an ordinary ethernet cable for connection. Connect the ergometer to the network using the ethernet cable. Ethernet port, type RJ45, is located at the lower side of the control panel of your device. The computer is connected with the trainer after connecting it to the network. Now proceed to settings of VirtualTraining. Continue as follows:

  • Plug ergometer in electricity.
  • DHCP system automatically assigns a unique IP address to the ergometer. You have to find it out and enter it to VirtualTraining.
  • Continue as follows:
  1. Plug the Cyclus2 device in electricity and local network and launch it.
  2. Go to „System“ in the main menu (use arrows) and confirm by OK button.
  3. Go to the last item „Information“ and confirm by OK button.
  4. Find IP address in Information window and note it.

 

 

picture_1.jpg

 

  • Launch VirtualTraining Desktop 3.6 on your computer and go to Settings -> Device Manager in the main menu.

 

picture_22.jpg

 

  • Choose section „CYCLUS2“ Tick off the field „Enable searching of Cyclus2 devices“.
  • Set IP address of the ergometer on the value you have assigned to it in the previous step.
  • Press the button „Add IP address“. The address will display in the lower field. VT can detect your device from this moment.

 

 

picture_2.jpg


The connection is done. We wish you a pleasant training!


WiFi


The computer detects the device and assigns the IP address to it automatically. The computer is connected to the device from this moment. Now proceed to settings of VT. Continue as follows:

  • Plug ergometer in electricity.
  • WiFi connection is usually allowed. Alternatively, use the help of Cyclus2 device and activate WiFi.
  • DHCP system automatically assigns a unique IP address to the ergometer. You have to find it out and enter it to VT.
  • Continue as follows:
  1. Plug the Cyclus2 device in electricity and local network and launch it.
  2. Go to „System“ in the main menu (use arrows) and confirm by OK button.
  3. Go to the last item „Information“ and confirm by OK button.
  4. Find IP address in Information window and note it

 

picture_1.jpg

 

 

  • Launch VirtualTraining Desktop 3.6 on your computer and go to Settings -> Device Manager in the main menu.

 

picture_4.jpg

 

  • Choose section „CYCLUS2“.
  • Tick off the field „Enable searching of Cyclus2 devices“.
  • Set IP address of the ergometer on the value you have assigned to it in the previous step.
  • Press the button „Add IP address“. The address will display in the lower field. VT can detect your device from this moment.

 

 

picture_5.jpg


The connection is done. We wish you a pleasant training!


Description of control program during the indoor training:

 

 

picture_6.png

 

 

Comments