Remote control

MULTIremote (O_Synce Remote) is a solution of remote buttons / remote shifters.

Rouvy supports the control of Rouvy App via remote buttons (O_Synce Remote). You are able to switch the view, change gear, pause or create a lap during the training. You will not need to touch your tablet, sweat more or use your keyboard on your desktop.

The O_Synce is dual ANT+/Bluetooth Smart device that you can buy via our e-shop.

Compatibility and version

Rouvy iPad

  • Supported by version 1.10.3 and newer
  • Only BLE communication. The iPad 2 is not able to pair with O-Synce remote.

Rouvy iPhone

  • Supported by version 1.1 and newer
  • Only BLE communication. The iPhone 4 is not able to pair with O-Synce remote.

 Rouvy Desktop

  • Supported by version 3.4.2874 and newer
  • Communication via ANT+ or BLE

 Android versions are supported as well.

Pairing

The MULTIremote must be paired as another sensor into your virtual bike before using it. Go to Settings -> Trainer&Sensors -> in the list of sensors pair the Remote control. Important! Rouvy iPad / iPhone / Android communicate with remote buttons via the Bluetooth Smart only, ANT+ is not supported! 

2017-08-03_10-36-24.png

In the Rouvy Desktop App, you should have to pair the MULTI-remote together with a pairing of other sensors in the pre-training screen. The App is searching for MULTI-remote control automatically, but you have to activate the MULTI-remote:

How to activate on Desktop?

Bluetooth communication: Pair MULTI remote into the Windows first and after that, you can launch the Rouvy Desktop, otherwise the MULTI-remote will not be recognized (how to pair any device in Windows, see here).

ANT+ communication: Pair MULTI remote in the pre-training screen like other sensors. Before each training, you have to pair the device again by press left and right buttons together and hold for about 2 seconds until the status LED flashes green and red at the same time. Now the MULTI remote is looking for the PC. Once the Status LED is flashing green, the MULTI remote is connected to PC successfully.

Once the MULTI remote is connected (via ANT+ or BLE) you can press any buttons in the pre training screen and the color of information text of Joule 3.0/MULTI remote will be changed too yellow.

Buttons mapping

The button work during training only and the mappings is slightly different for each type of training.

O-synce---front.png

 

Rouvy Desktop – Profile training \ Online race

Button Action for all trainers except IC Indoor Cycle 400+/Phantom 5000
Middle (short, long) Change view Change view
Left (short) Pause Gear Down
Right (short) Lap Gear Up
Left (long) Pause Pause
Right (long) Lap Lap

 

Rouvy Desktop – Workouts

Button Action for all trainers except IC

IC 400+/Phantom 5000

Workouts defined by W, W/Kg,%FTP

IC 400+/Phantom 5000

Workouts defined by % slope

Middle (short, long) Change view Change view Change view
Left (short) Segment power/slope DOWN Segment power DOWN Segment slope DOWN
Right (short) Segmen power/slope UP Segmen power UP Segment slope UP

Left (long)

Pause Pause Pause
Right (long) Skip segment Skip segment Skip segment

 

Rouvy iPad\iPhone\Androids – Profile training \ Online race

Button Action for all trainers except IC Indoor Cycle 400+/Phantom 5000
Middle (short, long) Change view Change view
Left (short) Pause Gear DOWN
Right (short) Lap Gear UP
Left (long) Pause Pause
Right (long) Lap Lap

 

Rouvy iPad \ iPhone \ Androids – Workouts \ Free ride \ FTP Test

Button Action for all trainers except IC

IC 400+/Phantom 5000

Workouts defined by W, W/Kg, %FTP

IC 400+/Phantom 5000

Workouts defined by % Slope

Middle (short, long) Change view Change view Change view
Left (short) Segment power/slope DOWN Segment power DOWN Segment slope DOWN
Right (short) Segmen power/slope UP Segmen power UP Segmen slope UP
Left (long) Pause Pause Pause
Right (long) Skip segment Skip segment Skip segment

 

Related links:

 

 

 

 

Comments