- How To Connect Via Bluetooth Or ANT+ On Android

Detail compatibility list for Android

In this section, you can find the detail information about what you need or what you can use for indoor training with VirtualTraining software on Android tablet. Please, read the article carefully, because unlike iPad, Android is distributed with many of different tablets, with so many of screen resolutions, network configurations etc and definitely we are not able to guarantee the compatibility with all devices.

Android tablet & ANT+ trainer

Minimum requirements
  • Android 4+
  • Video streaming is supported by Android 4.1+
  • Tablet has to fully support USB Host mode or ANT+ must be integrated. More information about USB host mode below.
  • You need to install the ANT Radio Service and the ANT USB service.
 
Accessories
  • or integrated ANT+ (most of Samsung & Sony tablets and mobiles)
 

We recommend to use the Samsung devices as the most valuable with integrated ANT+

 

Testing the USB Host capabilities
To check whether your device supports USB Host (or USB OnTheGo or USB OTG) check www.gsmarena.com, or just try to download the ANT USB service from your device from the Google Play Store. If you cannot find it, it means your device does not support USB Host. Another way to test if your device has USB Host capabilities is to use diagnostic applications that you can find in the Google Play Store. One of those applications is USB Host Diagnostics. You can find a list of tested devices with this application in the following website http://usbhost.chainfire.eu/. We are not involved with the USB Host Diagnostics application and take no responsibility for its accuracy.

Android tablet & Trainer with Bluetooth Smart

Minimum requirements:
  • Android 4.3
  • Bluetooth 4.0
Accessories:
  • All integrated, not necessary to use any external accessories...

 

*Please, make sure your BLE or ANT+ is enabled. ( see the picture below)

 

 

Related links:

 

 

Comments