Supported Smart Trainers
Using a fully supported smart trainer makes indoor cycling more fun and enjoyable. Smart trainers transmit power data and have the ability to change the resistance based on the course. Just like outdoor rides, when you go up and down hills, you'll feel it.
If your trainer or device is not listed here, that does not mean you are out of luck.
Check out here the list of supported classic/turbo trainers.
If you already know the brand you're interested in, that's great. You can check out here how to connect your Smart trainer and how the ANT+ and Bluetooth standards work.
Here is a quick way to jump to the trainers fully compatible with the ROUVY app:
ACER APX D.C ATHLETICS ELITE JET BLACK KINETIC MINOURA SARIS/CYCLEOPS STAC TACX TECHNOGYM THINKRIDER WAHOO ZYCLE
Acer
Name | Picture | ANT+ | Bluetooth | Calibration |
Xplova Noza S | ![]() |
![]() |
![]() |
Xplova Connect APP |
APX
Name | Picture | ANT+ | Bluetooth | Notes |
Pro Xpedo |
|
![]() |
![]() |
D.C. Athletics
Name | Picture | ANT+ | Bluetooth | Notes |
Tom Bonnen Tornado 1 |
|
![]() |
![]() |
Elite
Name | Picture | ANT+ | Bluetooth | Calibration | Notes |
Drivo I | ![]() |
![]() |
![]() |
UPGRADO App |
*NB* We do not support the older firmware and software below 031 |
Drivo II | ![]() |
![]() |
![]() |
UPGRADO App | |
Direto | ![]() |
![]() |
![]() |
UPGRADO App | |
Direto X |
|
![]() |
![]() |
UPGRADO App | |
Direto XR | ![]() |
![]() |
![]() |
UPGRADO App | |
Suito | ![]() |
![]() |
![]() |
UPGRADO App | |
Tuo | ![]() |
![]() |
![]() |
UPGRADO App | |
Zumo | ![]() |
![]() |
![]() |
UPGRADO App |
Jetblack
Name | Picture | ANT+ | Bluetooth | calibration |
Volt | ![]() |
![]() |
![]() |
JETBLACK CYCLING APP |
Kinetic
Name | Picture | ANT+ | Bluetooth | Calibration | Notes |
Kinetic R1 |
|
![]() |
![]() |
Kinetic Fit app | We support 2018 model trainers with build-in ANT+. |
*NB* Also, InRide 3 sensor (the green one) is supported.
Minoura
Name | Picture | ANT+ | Bluetooth | Calibration |
Kagura |
|
![]() |
![]() |
Minoura app |
Saris / CycleOps
Name | Picture | ANT+ | Bluetooth | calibration |
Hammer | ![]() |
![]() |
![]() |
Saris Utility app |
H2 | ![]() |
![]() |
![]() |
Saris Utility app |
H3 | ![]() |
![]() |
![]() |
Saris Utility app |
Magnus | ![]() |
![]() |
![]() |
Saris Utility app |
M2 | ![]() |
![]() |
![]() |
Saris Utility app |
Stac
Name | Picture | ANT+ | Bluetooth | Calibration |
Zero | ![]() |
|
![]() |
Stac zero |
Tacx
Name | Picture | ANT+ | Bluetooth | Calibration |
Flux S | ![]() |
![]() |
![]() |
Tacx Utility app |
Flux 2 | ![]() |
![]() |
![]() |
Tacx Utility app |
Neo | ![]() |
![]() |
![]() |
Tacx Utility app |
Neo 2T Smart | ![]() |
![]() |
![]() |
Tacx Utility app |
Vortex | ![]() |
![]() |
![]() |
Tacx Utility app |
Technogym
Name | Picture | ANT+ | Bluetooth | Calibration | Notes |
MyCycling |
|
|
![]() |
Technogym app | Launch the Technogym trainer first in the MyCycling app. Allow access to Rouvy. |
ThinkRider
Name | Picture | ANT+ | Bluetooth | Calibration |
X7 |
|
|
![]() |
ThinkRider app |
Wahoo
Name | Picture | ANT+ | Bluetooth | Calibration | Note |
Fitness Kickr |
|
|
![]() |
Wahoo Fitness app | |
Kickr Core |
|
![]() |
![]() |
Wahoo Fitness app | |
Fitness Kickr Snap |
|
|
![]() |
Wahoo Fitness app | |
Kicker ROLLR |
|
|
![]() |
*NB* The external power meter is needed |
Zycle
Name | Picture | ANT+ | Bluetooth | Calibration |
Smart Drive |
|
![]() |
![]() |
Zycle App |
Pro 3 | ![]() |
![]() |
![]() |
Zycle app |
Notes
- Power Meters are also supported if they follow the BLE Cycling Power Service specifications. In the case of pedals, you will get the right data, only if both pedals measure the power separately, otherwise, you will get the half value.
- Any other brands of trainers that have ANT+ FEC are supported.
- You can try to connect any smart trainer that supports the BLE specification Fitness Machine Service, but we cannot guarantee that it will work if the trainer is not on the list of supported.
For more help, please feel free to contact us.